Kiss Cut Stickers on Intact Backing Sheets

Kiss cut stickers are trimmed through the top sticker layer only, so the backing paper remains whole beneath every piece. Each sticker stays on a flat sheet until you peel it away. That behavior settles the main decision before any material or size is chosen: the order will be handled as a single sheet, not as a pile of separate stickers.

This is the format to choose when a tidy sheet needs to move through packing and handling without loose pieces, and when the set should stay together until the moment each sticker is pulled from its backing. The flat backing keeps the order easy to manage from the first count to the final handout.

The base material is either White Gloss Sticker or White Matte Sticker, and that choice sets the surface the printed design sits on. From there, the finish can be No Laminate, Matte Laminate or Gloss Laminate, so the same design can move through three different final surfaces.

The material decision shapes the look of the printed layer, while the finish decision determines whether that layer is left as printed or carries a laminate across its surface. Both choices sit above the backing and travel with the design into every use case the format serves.

The size range runs from a minimum of 30mm x 30mm to a maximum of 295mm x 425mm. You can choose one of eight presets: 30mm x 30mm, 30mm x 100mm, 50mm x 150mm, 60mm x 60mm, 75mm x 75mm, 75mm x 200mm, 120mm x 120mm or 200mm x 200mm. Custom dimensions also work when they stay between those outer limits.

Every design has a minimum quantity of 10 stickers, and the minimum order is 10 stickers per design. That floor applies whether you are working with a single preset size or a custom dimension, and it keeps small runs workable across the full size range.

The cut follows the outline of your artwork, so the outer edge you define in the file becomes the trim line for every piece. That makes the submitted design the source of the shape rather than a fixed preset imposed on it. For a custom kiss cut stickers order, the artwork needs a clean outer edge for each sticker so the cut path has a definite line to follow.

Because the cut line comes from the design outline, the file setup is a matter of making that outer edge clear enough to guide the trim. The shape of the piece and the shape of the file move together, which keeps the finished sticker tied to the artwork rather than to a standard cut.

Peeling one sticker leaves the neighboring pieces undisturbed, so a kit can stay tidy even after several pieces have been removed. That makes the format practical when stickers are taken one at a time over the life of a pack, and the remaining sheet keeps its shape for the next use.

Production time is 24 hours, which keeps the scheduling simple for the flat sheet format. As pieces are removed, the remaining set still sits flat rather than turning into loose singles.

Product sellers make these flat sheets part of packaging inserts and retail sticker packs, where the designs stay visible before one is peeled from the backing. Illustrators turn artwork into sellable sticker sheets and merchandise, keeping the pieces together on a surface that shows every design at once. Event organizers add them to welcome kits and hand them out as merchandise.

The common thread is a setting where the sheet itself is part of the experience: a tidy insert, a pack that displays a range of designs, or a kit where the sticker set stays flat among other printed materials.

The closest comparison is Die Cut Stickers, where the trim goes through the backing as well and each sticker is a separate piece. A sticker kisscut order takes the opposite path, so the format is chosen when a flat sheet matters more than individual separation.

If the priority is a printed sheet with multiple pieces rather than a single outline-driven cut, Sticker Sheets are the related sheet product to compare. For fixed-shape alternatives, Circle Stickers and Rectangle Stickers show how the range handles regular shapes when the design does not need to set the edge.