Spot UV Business Card with Velvet Laminate

A spot uv business card takes a clear varnish, applies it only to selected areas, and cures it instantly under ultraviolet light. The decision this product settles is which design elements carry the high shine and which remain unvarnished. When you search for spot gloss business cards, you are choosing a selected highlight rather than a full coated surface, so the card reads as a deliberate contrast from the first handover.

Each card is printed on 450 GSM artboard with a velvet laminate, and Spot UV is the only finish available on this product. The velvet laminate keeps the unvarnished areas soft, while the spot UV gives the marked elements a high shine that reads clearly when the card is held. The finish choice is therefore not between two coatings but between a matte field and the selected areas that take the clear varnish. The result is a card with one surface language for the background and a brighter one for the element you mark.

The card is offered at 90mm x 55mm in a rectangle or with rounded corners, and printing can be front only or front and back. Choose the rectangle for a classic edge or the rounded corner for a softer feel in the hand. Front-only printing keeps the varnish on the side you present; front and back printing lets both faces carry a selected mark. The smallest quantity offered is 250 cards, and production takes 2 to 4 working days, so the format choice is the one you settle before the run begins.

The Spot UV layer follows the marked areas of the card rather than coating the full sheet. The file separates the elements that receive clear gloss from everything else, so a logo, monogram or contact line can be the shine mark while the remaining card stays soft. The marked areas are the only places the clear varnish is applied, and the rest of the layout keeps the velvet laminate. This keeps the gloss attached to the exact parts of the design you want to appear brighter.

The varnish bonds to the stock rather than sitting on it as a film, so the finish is flat and durable. There is no raised ridge above the surface, and the card still feels like one sheet in the hand. The shine mark catches light as the card moves, but the edge between varnish and matte stays level. That flat construction is what keeps the card comfortable to pass across a table and to carry through repeated handling. The result is a finish that does not catch on a cardholder or the card beneath it.

Design and architecture studios often reserve the gloss for a project name, line drawing or monogram on an otherwise matte card. Property agents choose the rounded corner format for a card that feels softer when left at a viewing. Photographers and creative directors keep a portfolio URL or handle on both faces so it shows no matter which side lands upward. Wedding and event teams use the gloss on one detail only, keeping the rest of the card quiet instead of coated. In each setting, the selected shine mark gives the card a visible pause at the handover.

Standard Business Cards leave the whole surface matte, while a spot uv business card adds a selected gloss mark. Duplex Business Cards build contrast through layered colored stock, but this card keeps a single stock and creates contrast with clear varnish. Raised Foil Business Cards and Flat Foil Business Cards use metallic films, while the spot uv business card uses clear varnish instead of metal. Against Scodix Business Cards, the effect is a level gloss mark rather than a raised or textured surface.