Wine Label Designs

Each design here was drawn for small wineries, cellar door releases and private label runs, and each is a starting point you fill with your own wording. Choose one for your wine and bottle labels.

Already have a design? Upload it

Need fewer than 500 labels? Most of these designs also come on sticker sheets. Open a design to see the price.

Nothing quite right?

A designer creates your label from your brief for $49.90. Two options on the first proof and three rounds of changes.

Get a custom design

Matching wine and bottle labels and textured labels

Frequently Asked Questions
What size label fits a standard 750 ml wine bottle?

The front panel of a standard 750 ml wine bottle takes a rectangle between 70 x 120 mm and 100 x 150 mm. Ready-made designs here come in set rectangle sizes, among them 90 x 120 mm, 100 x 80 mm and 100 x 150 mm, and each sits inside that window. Where the glass curves or narrows, measure the flat area first.

Who is responsible for the mandatory wording on my wine labels?

You are. Every word that prints is yours to supply, the mandatory wording for your product included, and reading it over on the free PDF proof before you approve is your job too. Our team sets the details you send into the design and returns the proof to you.

What is the minimum order for a wine label design?

Labels start at 500 on a single roll, and that floor applies to each design and to each size. Runs go from 500 to 5,000, then 10,000 and 20,000, with anything bigger quoted by email. Below 500, or where you want sheets rather than a roll, the same shape comes as a sticker.

Which stock copes with a fridge or an ice bucket?

The White Synthetic stock, finished in matte or gloss laminate, suits chilled bottles. Neither water nor scuffing affects it, its acrylic adhesive stays stable across minus 20 degrees C to 80 degrees C, and oils and moisture do not loosen it. A bottle that moves from a fridge shelf to an ice bucket keeps its label. White Cast Paper has no water resistance, so keep it for dry shelves.

What is the felt stock on some wine label designs?

The felt option is stocked as Textured Labels: white felt paper, bright in tone, sealed with matt varnish, kiss cut and supplied 500 to a roll. It has wet strength without being waterproof, and some designs in the gallery are built around it. Production runs 48 hours from proof approval.

Learn More

Who these designs suit


These wine label designs were drawn with particular jobs in mind. Some serve a small winery's core range, front and back as a pair. Others fit a cellar door release, single vineyard bottling, natural wine, crown seal sparkling or a restaurant house pour.


Each wine label design is made for one label product, comes in three colourways, and works as a starting point you fill yourself.


How a ready design becomes your label


Pick a design and its product page opens, that design already selected and the print options filled in.


  • Change whatever you like, then add the job to your cart.
  • Open Upload Artwork and give us the brand, product name, wording, quantity, ingredients and anything else that prints, plus a logo if there is room.
  • Our team sets those details into the layout and emails a free PDF proof.
  • Nothing goes to print before you approve it.

Used as it stands, no design fee applies, so the labels cost you the print price. Choose a different shape or size and the layout is reworked at no charge.


Sizes, shapes and stock


Our wine label designs come at 90 x 120 mm, 100 x 80 mm, 95 x 110 mm and 100 x 150 mm, all rectangles, and the wine and bottle labels page lists every other size. A 750 ml bottle's front panel takes a rectangle from 70 x 120 mm to 100 x 150 mm.


For curved or narrow glass, our note on how to size a label for a bottle or jar covers the measuring.


White Synthetic, matte or gloss laminate over it, suits a chilled bottle: water and scuffing do it no harm, and neither oil nor moisture loosens the acrylic adhesive, which holds from minus 20 degrees C to 80 degrees C. Silver Metallic Film gives a metallic look.


Felt, from our textured labels range, is white felt paper with matt varnish, kiss cut and packed 500 to a roll. It has wet strength but no waterproofing, and some designs here are built for it.


Your wording, and the two paid routes


Names, addresses, figures and barcodes shown are invented samples, and yours replace them. Space is left for the wine name or variety, the alcohol figure, standard drinks, volume and any allergen note, and most designs also hold a barcode.


You supply every word that prints, the mandatory wording for your product among them, and the check against the proof is yours too.


Beyond wine, our product labels collection follows the same ordering steps.


Two paid routes reach past your own details. A brand tweak applies your colours and fonts, adjusts the layout, and the proof shows the outcome. A custom design gives you a designer working from your brief: two options first, then three rounds of revisions. Either fee lands on the order once.


Rolls, runs and delivery


  • The minimum order is one roll of 500 labels, for each design and each size.
  • Runs go from 500 to 5,000, then 10,000 and 20,000, with larger runs quoted by email.
  • Labels print one up, die cut, on that roll, ready for hand work or a labelling machine.
  • You can request the unwind direction at proofing.
  • Delivery across Australia is charged at one flat rate.

Up to five designs can share a single order, each with its own roll, and the label designs hub covers other label types.


The 48 hour production clock starts only when you approve the proof.


Approval comes before printing

Your details go into the design and a free PDF proof comes back to you by email.

Read every line before you approve. Nothing prints until you do, and the run is printed in Melbourne.

Labels by industry

All label designs · All labels