Wine Labels and Waterproof Bottle Labels

The front face of a standard 750ml wine bottle takes a rectangle in the 70mm W x 120mm H or 100mm W x 150mm H range. A slimmer beer or spirit bottle usually takes 50mm W x 100mm H, while a neck or cap seal is a small circle. Choose rectangle labels, oval labels, rounded corner labels and circle labels for bottle-ready sizes from 25mm up to 200mm depending on the shape. Then set the size and stock for your wine labels, beer labels or spirit bottles.

For a bottle that goes into a fridge, an ice bucket or a cold room, the label needs to survive condensation. Condensation is water on the label, and White Synthetic with Matte Laminate or Gloss Laminate is waterproof and scuff resistant. Its acrylic adhesive is stable from minus 20 degrees C to 80 degrees C and resists oils and moisture, so it covers chilled and frozen storage. White Cast Paper with laminate is a cost-effective paper stock for dry goods and indoor products, but it is not water-resistant. These waterproof labels are the right starting point for cold drinks and chilled bottles.

Clear Synthetic with Gloss Varnish is a transparent film for the no-label look on glass and coloured containers. It works well for gin, wine, sauce and oil bottles where the liquid colour or glass should stay visible. Use clear labels for a modern wine label that reads as printed glass rather than a white paper panel. The clear stock still receives a final design proof before printing, and the printed surface sits under gloss varnish rather than a paper background.

Minimum order is one roll of 500 labels per design and per size. The quantity ladder runs 500 to 5,000 in steps of 500, and up to five different designs can be printed on one order, each design on its own roll. Unwind direction can be requested at proofing. A final design proof is emailed before anything is printed, and printing starts only once the proof is approved. Production takes 48 hours after proof approval, and orders are shipped Australia-wide at a $10 flat rate.

White Cast Paper with Matte Laminate or Gloss Laminate is a cost-effective paper stock for dry goods and indoor products. It suits gift bottles, pantry sauce bottles and oils that stay on a dry shelf rather than in a fridge or ice bucket. This stock is not water-resistant, so it is the wrong choice for a bottle that will sweat. For a dry shelf wine label or bottle label with a paper look, choose White Cast Paper instead of a synthetic film.

Both Matte Laminate and Gloss Laminate add a clear protective layer over the printed surface. That layer handles moisture, oils, cleaning agents and everyday handling without marking the label. White Synthetic with laminate is scuff resistant, which helps when bottles knock against each other in a cold room or on a shelf. Labels are not rated for repeated dishwasher cycles, where sustained heat and detergent can lift edges over time. For a bottle label that needs to stay legible after handling, choose a laminate finish.